| Table size |
305 (W) x 230 (D) mm [12 (W) x 9.1 (D) in.] |
| XYZ-axis travels |
305 (X) x 230 (Y) x 40 (Z) mm [12 (X) x 9.1 (Y) x 1.6 (Z) in.] |
| XYZ-axis drive system |
Stepping motor, 3-axis simultaneous control |
|
Operating speed |
X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4
in./sec), Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec) |
| Software resolution |
0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step) |
| Mechanical resolution |
X and Y axes: 0.0025 mm/step (0.0001
in./step), Z axis: 0.00125 mm/step (0.0005 in./step) |
| Spindle motor |
Brushless DC motor, maximum 50 W |
| Spindle speed |
5,000 to 20,000 rpm |
| Tool chuck |
Cutter holder, collet method |
| Loadable workpiece thickness |
Maximum 40 mm (1.6 in.) or 38 mm (1.5 in.) when nose unit is used |
|
Connectivity |
USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant) |
| Control command set | RML-1 |
| Power requirements |
AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1) |
| Power consumption |
122 W |
| Acoustic noise level | During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) |
| Dimensions | 616 (W) x 591 (D) x 393 (H) mm [24.3 (W) x 23.3 (D) x 15.5 (H) in.] |
| Weight |
34 kg (75 lb.) |
| Environmental | Temperature: 5 to 40°C (41 to 104°F), Humidity: 35 to 80 % (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1) |
| Accessories | Power cord, Roland Software CD-ROM, Roland EngraveStudio™ CD-ROM, Roland Software Program Guide, Roland EngraveStudio™ Program Guide, and User's Manual |